Pooltest 3 Photometer

Pooltest 3 PhotometerClick to enlarge

Regular testing of pool water is essential for effective disinfection and pH control to ensure bather safety and comfort. The Palintest Pooltest 3 offers the ideal answer - a 3 parameter instrument which is quick, accurate and reliable.

Using the meter could not be simpler. First select the test parameter you wish to determine using the ‘Menu’ button. Place the sample plus test reagents in the tube, place in the meter and press the ‘ON’ button. The result is displayed instantaneously. The meter has automatic blank recognition and zero setting.

The use of innovative micro-power design means that approximately 20,000 readings can be taken before battery replacement will be required.

Palintest also offer certified Check Certificates as an optional extra. The Pooltest 3 Check Standards allow you to comply with your quality procedures.

Ordering Information

DescriptionProduct Code
Pooltest 3 Photometer with Soft Carry PouchContains 20 tests for Free and Total Chlorine, 20 tests for pH, 10 tests for Cyanuric Acid and 2 photometer test tubes.SP366Buy online
Pooltest 3 Photometer with Hard Carry CaseContains 20 tests for Free and Total Chlorine, 20 tests for pH, 10 tests for Cyanuric Acid and 2 photometer test tubes.SP367Buy online
Pooltest 3 Check Standards with Test CertificatePT234Buy online
Round Test Tubes for Photometer, 10 ml glass (Pack of 5)PT595/5Buy online
Optional Hard Carry Case for Single Parameter MetersPT238Buy online
Plastic Photometer Tubes (Pack of 5)PT524/5Buy online

Reagents

TestRange (mg/l)DescriptionProduct Code
Chlorine (DPD 1 and 3) Free and Combined0 - 5.0Replacement Reagent Pack (250 tests)AP031Buy online
Chlorine (DPD No 1) Free Chlorine0 - 2Replacement Reagent Pack (250 tests)AP011Buy online
Reagent Starter Pack (50 tests)PM011Buy online
Cyanuric Acid0 - 200Replacement Reagent Pack (250 tests)AP087Buy online
Reagent Starter Pack (50 tests)PM087Buy online
pH (Phenol Red)6.8 - 8.4Replacement Reagent Pack (250 tests)AP130Buy online
Reagent Starter Pack (50 tests)PM130Buy online

Request Further Information:

If you would like more information please fill in this form and one of our sales advisors will contact you.

Technical Specifications

INSTRUMENT TYPE
Single beam colorimeter pre-programmed for direct-reading
LIGHT SOURCE
Pulsed LED
OPERATION
2 button
BLANK/ZERO SETTING
Optionally held in memory or reset for each reading
INTERNAL CALIBRATION
Factory set 5 point calibration. Recalibration through internal software
INSTRUMENT CASE
Splash proof case with membrane keypad
RANGE
Chlorine 0 – 5 mg/l
PH 6.80 – 8.40
Cyanuric Acid 0 – 100 mg/l
TEMP RANGE
0 to 50 °C
POWER SUPPLY
2 x 1.5v batteries (included) Power management system with auto-switch off
BATTERY LIFE
Approx. 20,000 readings
SIZE
Pocked-sized – instrument only 173 x 75 x 44 mm

Downloads

Get Adobe Reader